Cast from 100% architectural solid brass in Marrakech ateliers. Free of synthetic lacquers and electroplated layers. Designed to naturally oxidize and self-heal with touch and time.
Moroccan Handcrafted Unlacquered Brass Pot Filler
Wall-mounted dual-jointed 24" swing arm stove faucet hand-lathed in Marrakech
Poured by our partner metalsmiths in Marrakech, Morocco. Dispatched direct to your doorstep with tracked express courier shipping.
Handcrafted exclusively in our Marrakech metalsmith atelier, this commercial-grade wall-mounted pot filler combines North African sand-cast craftsmanship with high-flow ceramic valving. Dual quarter-turn shut-off valves at both the wall flange and articulating spout tip provide double leak protection and allow effortless water flow control without reaching across heated stove burners. The dual-jointed 360-degree swing arm reaches up to 24 inches across front and back burners, then folds flat against the tile backsplash (2.5-inch depth) when idle. Engineered with a high-flow 3.8 GPM delivery, it fills an 8-quart stockpot in under 80 seconds. Hand-lathed from 100% solid unlacquered architectural brass, it is impervious to 60,000 BTU range heat and naturally deepens into an antique bronze patina with cooking steam and use.
- 1x Dual-Joint Articulated Pot Filler Faucet (24" Reach)
- 1x Solid Brass Threaded Wall Escutcheon Flange
- 1x 1/2" NPT Solid Brass Male-to-Female Inlet Nipple
- 1x Spare 1/4-Turn Ceramic Disc Cartridge Replacement Kit
- 1x Architectural Rough-In & Installation Template Sheet
- 1x Artisan Atelier Certificate of Origin
Because this piece is solid unlacquered living brass, it reacts naturally with oxygen, moisture, and touch:
- Natural Aging: Wipe clean with a soft dry cloth. A deep, warm antique luster develops over 6–12 months.
- Mirror Reset: A 30-second buff with metal polishing paste instantly restores the original Day 01 mirror shine.
Architectural Integrity & Craftsmanship Details
Solid Sand-Cast Metallurgy
Poured from pure copper-zinc ingot without hollow voids or pot-metal filler. Substantial physical weight and micro-textured surface reflect authentic sand mold casting.
Unlacquered Living Surface
Raw, unsealed brass with no artificial polyurethane coating. Reacts organically to touch, water, and humidity to develop a rich, timeless antique patina.
Precision Slotted Fasteners
Shipped with solid machined brass screws and mounting hardware matching the exact alloy and finish of the fixture, eliminating stripped zinc screw heads.
Complementary ✦ Hardware
View Full Series →
Architectural Metallurgy & Material Studies
Is Brass Magnetic? The Definitive Magnet Test for Solid Brass
Why authentic solid sand-cast brass is diamagnetic and will never attract a magnet, exposing cheap plated steel knockoffs.
Does Brass Rust? The Truth About Moisture, Steam & Patina
Learn why zero-iron architectural brass cannot rust, even in 100% steam showers, forming a protective cuprite passivation skin.
Brass Melting Point & Density: High-BTU Stove Resilience
Solidus/liquidus melting standards (1,650°F) and 8.5 g/cm³ density standards proving resilience behind commercial gas ranges.