Moroccan Living Brass • Marrakech Foundries

Solid Unlacquered Brass Wall-Mount Kitchen Faucets

Medina Brass wall-mount brass kitchen bridge faucets are sand-cast in Marrakech from solid binary 65/35 virgin brass (8.53 g/cm³ density) at 1,980°F with zero synthetic lacquers. Each fixture is lathe-machined to native US 1/2-inch NPT standards with 500,000-cycle ceramic disc cartridges, developing a rich living patina over 30 to 90 days.

Density: 8.53 g/cm³ (UNS C26000)US 1/2" NPT Male Inlets (Standard 8" Center Spread)Quarter-Turn Ceramic Disc Valves (500,000-Cycle Tested)
Worldwide Express Air: Complimentary insured DHL Express across 30+ countries (6–12 days)
100% Solid Living Brass: Zero pot metal or clear lacquers
30-Day Return Policy: Full refund upon verified physical return
Showing 3 Handcrafted Castings in this Collection
Engineering Specifications

Technical Architecture & Metallurgy Comparison

Engineering MetricMedina Brass Foundry SpecificationIndustry Showroom StandardMarketplace / Import Spec
Core Metallurgy & Alloy Density100% Solid Binary 65/35 Brass (8.53 g/cm³ Density)C36000 Bar Stock or Cast Brass (8.40 g/cm³)Unverified Scrap Brass / Zinc Die-Cast
Rough-In Plumbing ThreadsNative US 1/2" NPT (ASME B1.20.1)US 1/2" NPT or Showroom Adapter KitEuropean Metric BSP (Severe US Leak Risk)
Ceramic Disc Duty Cycle500,000 Cycles (European Diamond Kerox/Sedal)500,000 Cycles Commercial Rating50,000 Cycles Unbranded Plastic Cartridge
Surface Coating & Finish100% Raw Living Metal (Zero Synthetic Lacquer)PVD Coated or Chemically Aged LacquerSprayed Thin Polyurethane Coating
Lead-Free Safety CertificationNSF/ANSI/CAN 61 (<0.25% Weighted Lead)NSF/ANSI/CAN 61 & AB1953 CertifiedUncertified (Severe Lead Leaching Risk in Audits)
Direct Atelier Pricing$119.00 – $465.00 (Direct Atelier Pricing)$357 – $1860 (Showroom Overhead)$83 – $419 (Reseller Importers)
01 — Architectural Foundation

What Rough-In Depth Is Required for Wall-Mount Kitchen Faucets?

A bridge kitchen faucet features an elevated horizontal manifold connecting independent hot and cold risers above the countertop plane. Medina Brass bridge mixers are cast from solid binary UNS C26000 brass with an 8-inch on-center spread, accommodating thick fireclay sinks and high-arc gooseneck clearance with European diamond ceramic valves.

The structural hallmark of an authentic bridge faucet is the exposed horizontal waterway bridging the two vertical valve bodies. In Medina Brass atelier fixtures, this bridge manifold is cast as a single monolithic block rather than pieced together with threaded compression joints.

This monolithic construction eliminates concealed leak points behind apron-front sinks and guarantees perfect parallel alignment across standard 8-inch on-center drilling layouts (with 1-3/8" standard countertop bores).

02 — Engineering & Performance

How Do Wall-Mounted Brass Bridge Faucets Keep Countertop Surfaces Clean?

Solid brass side-sprayers operate under continuous line pressure to deliver high-velocity rinsing streams for culinary prep. Medina Brass spray wands are machined from monolithic virgin brass with weighted braided stainless hoses, preventing counterweight snagging and eliminating plastic spray heads that crack under high domestic water pressure.

Traditional showroom faucets often include lightweight plastic-bodied side sprayers that feel cheap and fail within three years. Our companion spray wand is machined from solid 1.8-lb bar stock with a cast brass counterweight suspended beneath the cabinet.

The high-arc gooseneck spout swivels 360 degrees smoothly on dual O-ring bearings, providing 10.5 inches of vertical clearance to wash oversized stockpots, baking sheets, and Dutch ovens with zero splashback.

Heritage Specifications

Architectural & Technical Installation FAQ

What countertop hole spread is required for this wall-mount brass kitchen bridge faucets?

Our straight-leg bridge kitchen faucets are engineered to standard American 8-inch center-to-center drilling spreads with 1-3/8" to 1-1/2" diameter countertop bores. Victorian cranked-leg models include offset unions adjusting from 7.8" to 8.4".

Does this bridge faucet include ceramic disc valves?

Yes. Each bridge tap is equipped with quarter-turn European diamond-polished ceramic disc cartridges tested to 500,000 drip-free cycles under pressures up to 125 PSI.

Can unlacquered living brass be polished back to its original mirror shine?

Yes, completely. Because our fixtures are cast from 100% solid binary brass with zero surface coatings or lacquers, applying standard metal polish (such as Cape Cod, Brasso, or Flitz) with a soft cotton cloth restores the mirror-like golden foundry luster in under three minutes at any point in the fixture's 50-year lifetime.

How does solid sand-cast brass compare to showroom electroplated brass?

Showroom brands typically use hollow stamped brass or zinc die-castings sealed with clear chemical lacquer or PVD coatings. When that surface layer inevitably scratches or degrades, moisture oxidizes the underlying metal, causing bubbling and peeling that cannot be restored. Medina Brass sand-casts solid UNS C26000 alloy with a monolithic 8.53 g/cm³ density, ensuring permanent structural integrity with zero peelable coatings.