Moroccan Living Brass • Marrakech Foundries

Architectural Solid Brass Bottle P-Traps & Drains

Medina Brass architectural brass bottle p-traps & drains are sand-cast in Marrakech from solid binary 65/35 virgin brass (8.53 g/cm³ density) at 1,980°F with zero synthetic lacquers. Each fixture is lathe-machined to native US 1/2-inch NPT standards with 500,000-cycle ceramic disc cartridges, developing a rich living patina over 30 to 90 days.

Density: 8.53 g/cm³ (UNS C26000)Native US 1-1/4" and 1-1/2" Slip-Joint StandardsHeavy Sand-Cast Slip-Joint Nut with EPDM Rubber Washers
Worldwide Express Air: Complimentary insured DHL Express across 30+ countries (6–12 days)
100% Solid Living Brass: Zero pot metal or clear lacquers
30-Day Return Policy: Full refund upon verified physical return
Showing 3 Handcrafted Castings in this Collection
Engineering Specifications

Technical Architecture & Metallurgy Comparison

Engineering MetricMedina Brass Foundry SpecificationIndustry Showroom StandardMarketplace / Import Spec
Core Metallurgy & Alloy Density100% Solid Binary 65/35 Brass (8.53 g/cm³ Density)C36000 Bar Stock or Cast Brass (8.40 g/cm³)Unverified Scrap Brass / Zinc Die-Cast
Rough-In Plumbing ThreadsNative US 1/2" NPT (ASME B1.20.1)US 1/2" NPT or Showroom Adapter KitEuropean Metric BSP (Severe US Leak Risk)
Ceramic Disc Duty Cycle500,000 Cycles (European Diamond Kerox/Sedal)500,000 Cycles Commercial Rating50,000 Cycles Unbranded Plastic Cartridge
Surface Coating & Finish100% Raw Living Metal (Zero Synthetic Lacquer)PVD Coated or Chemically Aged LacquerSprayed Thin Polyurethane Coating
Lead-Free Safety CertificationNSF/ANSI/CAN 61 (<0.25% Weighted Lead)NSF/ANSI/CAN 61 & AB1953 CertifiedUncertified (Severe Lead Leaching Risk in Audits)
Direct Atelier Pricing$89.00 – $159.00 (Direct Atelier Pricing)$267 – $636 (Showroom Overhead)$62 – $143 (Reseller Importers)
01 — Architectural Foundation

How Do Architectural Brass P-Traps & Pop-Up Drains Exceed Plumbing Codes?

An architectural bottle P-trap is an exposed cylindrical plumbing waste fitting designed for open-console vanities and pedestal lavatories. Medina Brass P-traps comply with ASME A112.18.2 standards, providing a certified 2-inch liquid trap seal that prevents hazardous sewer gas entry while maintaining native US 1-1/4-inch slip-joint compatibility.

In modern open-console vanity bathrooms, standard tubular plastic P-traps look industrial and unsightly. Medina Brass bottle traps transform functional plumbing waste lines into refined focal points, sand-cast from solid 65/35 binary brass with heavy wall thickness.

The lower cylindrical chamber unscrews effortlessly by hand for rapid hair and sediment cleanout without requiring plumbing wrenches or disconnecting the waste line from the wall.

02 — Engineering & Performance

How Does Pure Binary Brass Prevent Corrosion from Household Cleaners and Drainage?

High-efficiency waste water velocity prevents sediment accumulation inside exposed decorative drainage traps through smooth internal sand-cast waterways. Medina Brass brass traps feature precision lathe-machined slip-joint collars with high-density EPDM compression gaskets, eliminating leaks under thermal cycling from 40°F to 160°F waste discharge.

Because our waste assemblies, basket strainers, and vanity mixers are cast in the same foundry batches from identical UNS C26000 alloy, they develop living patinas at identical chemical rates, ensuring finish harmony across the entire installation.

Heritage Specifications

Architectural & Technical Installation FAQ

Is this architectural brass bottle p-traps & drains compatible with standard US plumbing waste pipes?

Yes. Our bottle P-traps feature standard 1-1/4" OD brass slip-joint extension tubes and compression nuts compliant with ASME A112.18.2 waste fixture standards, including matching wall flange escutcheons.

How is this bottle P-trap cleaned?

The bottom cylindrical trap reservoir unscrews by hand for quick periodic sediment and hair removal without needing pipe wrenches or disconnecting the primary plumbing waste line.

Can unlacquered living brass be polished back to its original mirror shine?

Yes, completely. Because our fixtures are cast from 100% solid binary brass with zero surface coatings or lacquers, applying standard metal polish (such as Cape Cod, Brasso, or Flitz) with a soft cotton cloth restores the mirror-like golden foundry luster in under three minutes at any point in the fixture's 50-year lifetime.

How does solid sand-cast brass compare to showroom electroplated brass?

Showroom brands typically use hollow stamped brass or zinc die-castings sealed with clear chemical lacquer or PVD coatings. When that surface layer inevitably scratches or degrades, moisture oxidizes the underlying metal, causing bubbling and peeling that cannot be restored. Medina Brass sand-casts solid UNS C26000 alloy with a monolithic 8.53 g/cm³ density, ensuring permanent structural integrity with zero peelable coatings.