Moroccan Living Brass • Marrakech Foundries

Solid Brass Wall-Mount Pot Fillers & Stove Faucets

Medina Brass solid brass wall-mount pot fillers & stove faucets are sand-cast in Marrakech from solid binary 65/35 virgin brass (8.53 g/cm³ density) at 1,980°F with zero synthetic lacquers. Each fixture is lathe-machined to native US 1/2-inch NPT standards with 500,000-cycle ceramic disc cartridges, developing a rich living patina over 30 to 90 days.

Density: 8.53 g/cm³ (UNS C26000)Native US 1/2" NPT Female Drop-Ear (ASME B1.20.1)Dual Quarter-Turn Kerox Ceramic Disc Valves
Worldwide Express Air: Complimentary insured DHL Express across 30+ countries (6–12 days)
100% Solid Living Brass: Zero pot metal or clear lacquers
30-Day Return Policy: Full refund upon verified physical return
Showing 3 Handcrafted Castings in this Collection
Engineering Specifications

Technical Architecture & Metallurgy Comparison

Engineering MetricMedina Brass Foundry SpecificationIndustry Showroom StandardMarketplace / Import Spec
Core Metallurgy & Alloy Density100% Solid Binary 65/35 Brass (8.53 g/cm³ Density)C36000 Bar Stock or Cast Brass (8.40 g/cm³)Unverified Scrap Brass / Zinc Die-Cast
Rough-In Plumbing ThreadsNative US 1/2" NPT (ASME B1.20.1)US 1/2" NPT or Showroom Adapter KitEuropean Metric BSP (Severe US Leak Risk)
Ceramic Disc Duty Cycle500,000 Cycles (European Diamond Kerox/Sedal)500,000 Cycles Commercial Rating50,000 Cycles Unbranded Plastic Cartridge
Surface Coating & Finish100% Raw Living Metal (Zero Synthetic Lacquer)PVD Coated or Chemically Aged LacquerSprayed Thin Polyurethane Coating
Lead-Free Safety CertificationNSF/ANSI/CAN 61 (<0.25% Weighted Lead)NSF/ANSI/CAN 61 & AB1953 CertifiedUncertified (Severe Lead Leaching Risk in Audits)
Direct Atelier Pricing$288.00 – $389.00 (Direct Atelier Pricing)$864 – $1556 (Showroom Overhead)$202 – $350 (Reseller Importers)
01 — Architectural Foundation

Why Does a Pot Filler Require Structural In-Wall Backing & 1/2" NPT Fittings?

A pot filler is an articulating commercial-grade kitchen faucet mounted directly above a cooking range to deliver high-volume cold water into stockpots. Medina Brass pot fillers feature native US 1/2-inch NPT brass drop-ear fittings, requiring solid 2x6 horizontal timber blocking behind wallboard to support 24-inch leverage and 125 PSI hydrostatic pressure.

Installing an articulating wall-mount pot filler introduces significant cantilevered torque to in-wall plumbing. When the dual-jointed brass swing arm is extended to its maximum 24-inch reach with full water volume flowing, dynamic rotational shear forces are exerted directly on the wall elbow.

To ensure zero flex and prevent micro-cracking of finished kitchen backsplashes (such as handcrafted Moroccan Zellige or marble slabs), standard copper pipes alone are insufficient. We mandate a solid 2x6 wood stud horizontal cross-member lagged into adjacent vertical wall studs, securing a cast brass drop-ear elbow tested under 125 PSI hydrostatic pressure.

Plumbing rough-in elevation should be calibrated exactly 12 to 14 inches above the highest grate of the cooktop to clear tall stockpots and pasta colanders while preventing heat impingement from high-BTU gas burners.

02 — Engineering & Performance

How Do Solid Brass Pot Fillers Withstand Gas Cooktop Radiant Heat?

Thermal shock immunity in cooking faucets prevents valve failure and metal distortion caused by direct radiant heat from stove burners. Medina Brass fixtures are cast from solid binary UNS C26000 brass with a melting point of 1,980°F, operating safely directly above high-output commercial-style gas cooktops without degradation.

Standard commercial faucets utilizing thin die-cast zinc alloys or electroplated plastic components suffer premature seal failure when exposed to continuous convection currents from open gas flames. Medina Brass fixtures are monolithic castings with 8.53 g/cm³ metal density and 1/8" wall thickness.

Each pot filler is equipped with dual quarter-turn shut-off valves fitted with genuine Kerox 500,000-cycle ceramic discs. Having two independent shutoffs guarantees that high-pressure municipal water is isolated both at the wall stud and at the spout tip, completely eliminating drip risks over hot burners.

Heritage Specifications

Architectural & Technical Installation FAQ

What in-wall plumbing rough-in is required for this solid brass wall-mount pot fillers & stove faucets?

Medina Brass pot fillers feature a female 1/2" NPT brass drop-ear elbow connection. We mandate installing a horizontal 2x6 timber cross-member secured between wall studs 12 to 14 inches above the cooking range surface to support the 24-inch cantilevered swing arm under full 4.0 GPM flow.

Can this pot filler be safely installed above high-BTU commercial gas ranges?

Yes. Cast from solid binary 65/35 virgin brass with an 8.53 g/cm³ density, Medina Brass pot fillers withstand continuous ambient convection heat from 60,000 BTU burners with zero seal degradation or thermal distortion.

Can unlacquered living brass be polished back to its original mirror shine?

Yes, completely. Because our fixtures are cast from 100% solid binary brass with zero surface coatings or lacquers, applying standard metal polish (such as Cape Cod, Brasso, or Flitz) with a soft cotton cloth restores the mirror-like golden foundry luster in under three minutes at any point in the fixture's 50-year lifetime.

How does solid sand-cast brass compare to showroom electroplated brass?

Showroom brands typically use hollow stamped brass or zinc die-castings sealed with clear chemical lacquer or PVD coatings. When that surface layer inevitably scratches or degrades, moisture oxidizes the underlying metal, causing bubbling and peeling that cannot be restored. Medina Brass sand-casts solid UNS C26000 alloy with a monolithic 8.53 g/cm³ density, ensuring permanent structural integrity with zero peelable coatings.