Moroccan Living Brass • Marrakech Foundries

Solid Unlacquered Brass Bathroom Vanity Faucets

Medina Brass solid brass bathroom vanity faucets are sand-cast in Marrakech from solid binary 65/35 virgin brass (8.53 g/cm³ density) at 1,980°F with zero synthetic lacquers. Each fixture is lathe-machined to native US 1/2-inch NPT standards with 500,000-cycle ceramic disc cartridges, developing a rich living patina over 30 to 90 days.

Density: 8.53 g/cm³ (UNS C26000)US 1/2" NPT or 3/8" Compression Flexible Riser Inlets500,000-Cycle Diamond-Polished Ceramic Disc Valve
Worldwide Express Air: Complimentary insured DHL Express across 30+ countries (6–12 days)
100% Solid Living Brass: Zero pot metal or clear lacquers
30-Day Return Policy: Full refund upon verified physical return
Showing 3 Handcrafted Castings in this Collection
Engineering Specifications

Technical Architecture & Metallurgy Comparison

Engineering MetricMedina Brass Foundry SpecificationIndustry Showroom StandardMarketplace / Import Spec
Core Metallurgy & Alloy Density100% Solid Binary 65/35 Brass (8.53 g/cm³ Density)C36000 Bar Stock or Cast Brass (8.40 g/cm³)Unverified Scrap Brass / Zinc Die-Cast
Rough-In Plumbing ThreadsNative US 1/2" NPT (ASME B1.20.1)US 1/2" NPT or Showroom Adapter KitEuropean Metric BSP (Severe US Leak Risk)
Ceramic Disc Duty Cycle500,000 Cycles (European Diamond Kerox/Sedal)500,000 Cycles Commercial Rating50,000 Cycles Unbranded Plastic Cartridge
Surface Coating & Finish100% Raw Living Metal (Zero Synthetic Lacquer)PVD Coated or Chemically Aged LacquerSprayed Thin Polyurethane Coating
Lead-Free Safety CertificationNSF/ANSI/CAN 61 (<0.25% Weighted Lead)NSF/ANSI/CAN 61 & AB1953 CertifiedUncertified (Severe Lead Leaching Risk in Audits)
Direct Atelier Pricing$255.00 – $345.00 (Direct Atelier Pricing)$765 – $1380 (Showroom Overhead)$179 – $311 (Reseller Importers)
01 — Architectural Foundation

What Is the Difference Between Centerset and Widespread Bathroom Faucets?

A single-hole gooseneck kitchen faucet integrates hot and cold water mixing into a compact monobloc casting with an elevated 360-degree swivel spout. Medina Brass gooseneck mixers feature standard 1-3/8" single-bore deck mounting and diamond ceramic cartridges, delivering effortless one-handle flow control for prep sinks.

Island prep sinks and modern kitchen workstations require high vertical spout clearance without cluttering stone countertops with multiple mounting holes. A single-hole gooseneck mixer provides up to 10 inches of clear working height.

The fluid 360-degree swivel allows complete rotational flexibility to fill oversized pitchers or service double-basin undermount sinks with equal ease.

02 — Engineering & Performance

How Does Living Brass Naturally Sanitize Bathroom Sink Surfaces?

High-arc gooseneck spouts maximize usable sink volume by elevating the water discharge point well above the countertop deck. Precision O-ring seals and grease reservoirs ensure smooth rotational glide that never binds or leaks even after years of daily residential culinary service.

Our monobloc faucets include stainless-steel braided flexible water supply lines with standard 3/8" compression connections for rapid, direct plumber installation.

Heritage Specifications

Architectural & Technical Installation FAQ

How does unlacquered solid brass develop a living patina over time?

Unlacquered binary UNS C26000 brass reacts naturally with ambient oxygen and moisture. Over the first 30 to 90 days, the initial bright golden surface deepens into warm honey, amber, and antique bronze hues. Natural hand contact accelerates patina development in high-touch areas while remaining lighter in low-touch zones.

Are Medina Brass fixtures fully compatible with North American plumbing standards?

Yes. Every Medina Brass fixture is precision-lathed with native US 1/2" NPT threads or supplied with US 3/8" OD compression flex risers. All mechanical waterways are tested under 125 PSI hydrostatic pressure and comply with ASME A112.18.1 / CSA B125.1 and NSF/ANSI/CAN 61 lead-free certification.

Can unlacquered living brass be polished back to its original mirror shine?

Yes, completely. Because our fixtures are cast from 100% solid binary brass with zero surface coatings or lacquers, applying standard metal polish (such as Cape Cod, Brasso, or Flitz) with a soft cotton cloth restores the mirror-like golden foundry luster in under three minutes at any point in the fixture's 50-year lifetime.

How does solid sand-cast brass compare to showroom electroplated brass?

Showroom brands typically use hollow stamped brass or zinc die-castings sealed with clear chemical lacquer or PVD coatings. When that surface layer inevitably scratches or degrades, moisture oxidizes the underlying metal, causing bubbling and peeling that cannot be restored. Medina Brass sand-casts solid UNS C26000 alloy with a monolithic 8.53 g/cm³ density, ensuring permanent structural integrity with zero peelable coatings.