Moroccan Living Brass • Marrakech Foundries

Solid Unlacquered Brass Cabinet Hardware Pulls

Medina Brass unlacquered brass cabinet hardware pulls are sand-cast in Marrakech from solid binary 65/35 virgin brass (8.53 g/cm³ density) at 1,980°F with zero synthetic lacquers. Each fixture is lathe-machined to native US 1/2-inch NPT standards with 500,000-cycle ceramic disc cartridges, developing a rich living patina over 30 to 90 days.

Density: 8.53 g/cm³ (UNS C26000)Standard 8-32 Machine Screws (Dual Length Included)Sand-Cast Solid Binary 65/35 Brass Handles & Knobs
Worldwide Express Air: Complimentary insured DHL Express across 30+ countries (6–12 days)
100% Solid Living Brass: Zero pot metal or clear lacquers
30-Day Return Policy: Full refund upon verified physical return
Showing 3 Handcrafted Castings in this Collection
Engineering Specifications

Technical Architecture & Metallurgy Comparison

Engineering MetricMedina Brass Foundry SpecificationIndustry Showroom StandardMarketplace / Import Spec
Core Metallurgy & Alloy Density100% Solid Binary 65/35 Brass (8.53 g/cm³ Density)C36000 Bar Stock or Cast Brass (8.40 g/cm³)Unverified Scrap Brass / Zinc Die-Cast
Rough-In Plumbing ThreadsNative US 1/2" NPT (ASME B1.20.1)US 1/2" NPT or Showroom Adapter KitEuropean Metric BSP (Severe US Leak Risk)
Ceramic Disc Duty Cycle500,000 Cycles (European Diamond Kerox/Sedal)500,000 Cycles Commercial Rating50,000 Cycles Unbranded Plastic Cartridge
Surface Coating & Finish100% Raw Living Metal (Zero Synthetic Lacquer)PVD Coated or Chemically Aged LacquerSprayed Thin Polyurethane Coating
Lead-Free Safety CertificationNSF/ANSI/CAN 61 (<0.25% Weighted Lead)NSF/ANSI/CAN 61 & AB1953 CertifiedUncertified (Severe Lead Leaching Risk in Audits)
Direct Atelier Pricing$38.00 – $168.00 (Direct Atelier Pricing)$114 – $672 (Showroom Overhead)$27 – $151 (Reseller Importers)
01 — Architectural Foundation

How Are Solid Brass Cabinet Pulls & Latches Sand-Cast for Architectural Durability?

Sand-cast unlacquered brass cabinet hardware comprises solid pulls, knobs, and latches molded from binary UNS C26000 alloy at 1,980°F. Medina Brass hardware delivers high structural mass and tensile strength, engineered with standard 8-32 machine screw threads and organic sand textures that deepen into antique patina through daily hand touch.

Cabinet pulls and knobs are the primary tactile touchpoint of any kitchen or bath renovation. Hollow zinc die-castings feel lightweight and cold, while electroplated coatings quickly wear away around mounting screw holes.

Medina Brass cabinet pulls are monolithic sand-castings with a reassuring heavy hand-feel. Each piece is cast individually by Marrakech artisans, resulting in subtle organic texture variations that impart warmth to custom millwork.

02 — Engineering & Performance

How Does Living Brass Develop Dynamic Natural Highlights on Cabinet Hardware?

Living brass hand-burnishing occurs naturally when human skin oils and mechanical friction contact raw, unlacquered copper-zinc alloys. High-touch contact surfaces burnish to a brilliant golden highlight while recessed contours accumulate rich cuprous oxide undertones, creating a two-tone heirloom depth that artificial factory coatings cannot replicate.

Every mounting stem is tapped on precision mechanical lathes to standard North American 8-32 thread dimensions. We include dual-length break-away machine screws to accommodate both 3/4" shaker cabinet door faces and 1.5" double-thick drawer fronts.

Heritage Specifications

Architectural & Technical Installation FAQ

What mounting screws are included with this unlacquered brass cabinet hardware pulls?

Every Medina Brass hardware piece includes solid machined brass mounting screws and slotted wood screws engineered for standard 3/4" cabinet faces and 1-1/2" drawer boxes.

Will the living brass finish wear off on cabinet handles?

No. Unlike electroplated zinc pulls that flake or rub off, Medina Brass hardware is 100% solid virgin brass throughout. Hand contact naturally burnishes contact edges to a warm golden glow while recessed curves develop antique bronze patina.

Can unlacquered living brass be polished back to its original mirror shine?

Yes, completely. Because our fixtures are cast from 100% solid binary brass with zero surface coatings or lacquers, applying standard metal polish (such as Cape Cod, Brasso, or Flitz) with a soft cotton cloth restores the mirror-like golden foundry luster in under three minutes at any point in the fixture's 50-year lifetime.

How does solid sand-cast brass compare to showroom electroplated brass?

Showroom brands typically use hollow stamped brass or zinc die-castings sealed with clear chemical lacquer or PVD coatings. When that surface layer inevitably scratches or degrades, moisture oxidizes the underlying metal, causing bubbling and peeling that cannot be restored. Medina Brass sand-casts solid UNS C26000 alloy with a monolithic 8.53 g/cm³ density, ensuring permanent structural integrity with zero peelable coatings.